315/70R17 (35s) 2012 6-speed and 4.56 gears

[spinned]

In sixth gear. Picture says it all.

 

[WJCO]

What was the thread started for? Did you have a question about this? :thinking:

 

[OverlanderJK]

What was the thread started for? Did you have a question about this? :thinking:

The picture said it all.


Sent from my iPhone using WAYALIFE mobile app

 

[QuicksilverJK]

What was the thread started for? Did you have a question about this? :thinking:

Apparently the picture says it all [emoji849]


Sent from my iPhone using WAYALIFE mobile app

 

[WJCO]

The picture said it all.


Sent from my iPhone using WAYALIFE mobile app

Apparently the picture says it all [emoji849]


Sent from my iPhone using WAYALIFE mobile app

Apparently.....

 

[spinned]

Ok ok let me explain it. I searched and searched to try to figure out whether 4.10, 4.56, 4.88 or 5.13s would work best for me. The picture shows the jeep is running 2700rpm in 6th gear doing 70. I just wished I had seen a picture like that when I was deciding on gears. Just trying to help out fellow Wayalifers that might have a 6-speed and thinking about putting on 35s.

 

[FallonJeeper]

Did you calibrate the computer for the speedo?

 

[spinned]

Did you calibrate the computer for the speedo?

Yes I did. I have the AEV Procal

 

[QuicksilverJK]

Being that 315s are closer to 34" to start with and vary based on manufacturer and wheel width, I would say this chart is pretty close to accurate.



Sent from my iPhone using WAYALIFE mobile app