2014 JKU Sport Build

Greenmachine14

New member
Hi all I have been planning out my build and accumulating parts since I got my jeep in September. I am piecing together a 3" lift around some synergy springs. Placed an order for bumpstops, rear track bar bracket, front track bar, procal, front lca's, and some other small parts. I will be installing the lift in a few weeks once I decide on a tire setup.

I have some time this week since i took a few days off from work so i started a front bumper build yesterday afternoon. The pics just show it tacked together but I got it welded out today. Tomorrow I will work on radiusing all the edges and installing the stinger or light bar.
 

Attachments

  • 1451353439381.jpg
    1451353439381.jpg
    85.9 KB · Views: 416
  • 1451353482778.jpg
    1451353482778.jpg
    66.1 KB · Views: 417
  • 1451353500571.jpg
    1451353500571.jpg
    48.3 KB · Views: 415
  • 1451353513558.jpg
    1451353513558.jpg
    61.6 KB · Views: 416
Finished up welding out the light bar today. Here's some pics of the finished bumper. Going to order some Bolt on d ring mounts either from evo or pure jeep but its pretty much set right now. Painting tonight with rustoleum bedliner and hopefully installing tomorrow.
 

Attachments

  • 1451513825059.jpg
    1451513825059.jpg
    80.7 KB · Views: 283
  • 1451513841577.jpg
    1451513841577.jpg
    90.9 KB · Views: 290
  • 1451513856637.jpg
    1451513856637.jpg
    89.2 KB · Views: 290
Got the bumper sprayed with bedliner and put on last week. The wife was pissed because i sprayed it in the basement and the whole house smelled like spraybomb.

Also got my synergy lca's and rk track bar yesterday so that should round out all of the parts I need for my lift install. My garage isn't heated so the lift will have to wait a few weeks until I can get a spot in my dad's shop which is heated. You guys in warmer climates have it made lol!
 

Attachments

  • 1452213135444.jpg
    1452213135444.jpg
    65.9 KB · Views: 262
  • 1452213151603.jpg
    1452213151603.jpg
    75.1 KB · Views: 260
  • 1452213167010.jpg
    1452213167010.jpg
    78.1 KB · Views: 270
Started the lift install today. Started with a pile of parts synergy lca's, 3" synergy springs, rock krawler front track bar, spidertrax, and other misc. Parts. Got through the most of the install today and going to finish up tomorrow.
 

Attachments

  • 1454131517948.jpg
    1454131517948.jpg
    67.6 KB · Views: 247
  • 1454131543056.jpg
    1454131543056.jpg
    75.8 KB · Views: 246
  • 1454131556071.jpg
    1454131556071.jpg
    65.5 KB · Views: 246
Also got some slightly used 315 70 17 Cooper stts that I'm going to have mounted on the stock moab rims once the lift is done.
 

Attachments

  • 1454131670334.jpg
    1454131670334.jpg
    92.7 KB · Views: 248
  • 1454131688091.jpg
    1454131688091.jpg
    68.4 KB · Views: 253
Got the coopers mounted today. The end result is a bit taller than i thought, I ended up getting about 4" in front and 4.5" in the back from the synergy coils. I guess I need to build a new rear bumper and get a winch for the front to bring the height down a bit. 😁. Here's some pics with the tires mounted.
 

Attachments

  • 1454297370062.jpg
    1454297370062.jpg
    97.2 KB · Views: 231
  • 1454297387872.jpg
    1454297387872.jpg
    89.3 KB · Views: 230
  • 1454297422911.jpg
    1454297422911.jpg
    75.8 KB · Views: 230
  • 1454297480523.jpg
    1454297480523.jpg
    85.7 KB · Views: 234
The wife and I stopped by the dealership on the way home from running errands to look at some jks for her since she likes mine better then her liberty and I couldn't resist taking a pic next to a stock JKU Sport lol.
 

Attachments

  • 1454297642995.jpg
    1454297642995.jpg
    64.5 KB · Views: 253
No updates for a while now but I did score a Trektop NX on craigslist this weekend and installed it this afternoon. Also have a new spare on order and looking into tire carriers. Here's the pics of the jeep with the new top.
 

Attachments

  • 1462246917895.jpg
    1462246917895.jpg
    100.5 KB · Views: 184
  • 1462246932221.jpg
    1462246932221.jpg
    89.4 KB · Views: 194
Finally got my spare mounted. Using the stock carrier for now and moved the taillight lower so it comes through the wheel spokes.

Took off the rear bumper to get it to fit and I'm kind of digging the look without it. Debating what to do for a permanent bumper and carrier now.
 

Attachments

  • 1467856708225.jpg
    1467856708225.jpg
    70.3 KB · Views: 125
  • 1467856720770.jpg
    1467856720770.jpg
    75.5 KB · Views: 126
Not much action on the build lately the wife an I just had our first child last Friday! Managed to get some time to head to the scrap yard and pick up some 3/16 plate for a rear bumper build.

Was thinking about just running the evo fascia but I think I like the idea is having some corner protection since most of the trails I run are in the woods and I have had a history of accidentally backing into trees.

First pic is the pile of scrap. Second pic is the start of the mounts to the frame. Third pic is the top of the bumper. More to follow tomorrow when I start tacking pieces together.
 

Attachments

  • 1472871698531.jpg
    1472871698531.jpg
    75.6 KB · Views: 111
  • 1472871784852.jpg
    1472871784852.jpg
    80.7 KB · Views: 112
  • 1472871796775.jpg
    1472871796775.jpg
    91.9 KB · Views: 110
Wow, I'm not sure how I missed this thread, especially since you're just an hour or so north of me. First of all, congratulations on the baby! I remember what it was like to be at the starting line, where you are now, but my kid is going on 14 now and likes nothing more than to drive my Jeep when off road. Second, your Jeep is looking great! I always liked that color and the fact that you are building bumpers and doing all the work yourself; man, my hats off to you! Now table this stuff and spend time with that baby. It's unbelievable how quickly this time will slip away!
 
Top Bottom