Search results

Back in 2011 my wife and I took a road trip from Texas through Colorado into Utah. We stopped off in Moab to see Arches National Park. We didn't have a jeep or even have one on the radar. After seeing all the jeeps running around Moab we decided to take a tour from one of the local jeep guides...

Many thanks to Rock Hard, Eddie, and Cindy for the opportunity to win a Sport Cage. I could use one of these for several reasons. Mostly for the added safety that it would provide. Peace of mind during a roll over is way up there as well.

I could use one of these.

We had the whole Ferry to ourselves. No profit for Utah on this run.

I went with this. It snaps on the rollers of your fairlead. It has never fallen off. Cheap and easy, cost a little over $20.

Thanks everyone for the help. Attached is a pic of how they are set now. You think a half inch more will do the trick?

Today I was giving my Jeep a once over getting ready for a trip to Moab and noticed the spring was off the perch where it is supposed to be sitting. With my trusty floor Jack I raised the jeep up high enough to get the spring back in place. Reckon what I need to be looking at for the reason the...

Raining and a nice 48 degrees here in my part of Texas. Today I screwed on a little air filter for the supply hose on my Powerplant. After searching the web for a Warn replacement I settled on one from Amazon. It doesn't have the holes on the top like the original did. Just one hole on the...

Tigger riding shotgun Saw this today at the local Kens Pizza.

Drake Hood latches Installed a set of Drake Hood Latches. Kind of a pain to install but I like the way they look.

On the backside of where the rear seat belts bolt on there is a hole that you thread with the supplied tap. The brackets bolt up there. I didn't take any pictures of the brackets but the ones below look pretty close. In the picture they are swapped as far as which side they mount to.

High & Dry Bought some brackets to mount my Hi-Lift Jack up high on the sport cage. No more rust on the tire carrier or bumper.

Bought some brackets to mount my Hi-Lift up high on the sport cage.

Not the best but all I had on my iPad. Crescent City, CA Somewhere around Jedediah Smith Redwoods State Park, CA. I can't remember exactly where.

Took advantage of the nice weather we are having in Texas and installed a Vector Exo Rack and four 2 gallon Rotopax gas cans. View from the back. Side view.

It's been awhile since I updated this thread so here is what I did today. Installed a TeraFlex trail table. It is definately not the heaviest duty table I've seen but will support 65 pounds which is plenty for what I intend to use it for. It is made out of aluminum so it is light. Has latches...

Installed a trail table. I also installed the EVO Evap Skid but did't take a picture of that. Made out of 3/16 plate, if you knock that baby off you have just had a bad day.

Today I hooked up a KC Highlites Cyclone LED. It puts out quite a bit of light. Plenty enough for checking fluid levels.

Not really wildlife but seen on the trail. Eureka Gulch (Colorado) 9-14. There always seems to be a least one....

We saw this Deer on the way to Cinnamon Pass (Colorado) September 2014.