Search results

These are in great condition. Bolt on. Johnny Joints were greased every 5000 miles. We're used as my daily driver & weekend wheeler. Total miles was about 17000. https://evomfg.com/products/all-8-enforcer-adjustable-control-arms-for-jk-jku EVO-1139b $1250 Ships free.

Thanks for the great write-up! We tackled that job yesterday. Just to add a lil extra here....I used the 9/16" flexhead ratchet wrench stubby on the bolt head facing about 11 o'clock. The bolt head facing about 2 o'clock I used an offset 12 pt closed wrench. The bolt head facing about 4...

Thanks guys. Being this my dd & wheeler I installed the Rubicon tcase yesterday. Tested on the highway & on to some dirt roads. I went through all the gears in 4low & 4hi. Super smooth, easy shifting, no binding, no odd noises. Probably replace the bearing sooner than later. Turns out I...

Hey guys I picked up a used Rubicon tcase with 55k on it. I removed my sport tcase. I was about to install the Rubicon tcase but noticed there is some up/down play. Safe to wheel & drive with the lil amount of play shown on this video? Thanks.

PMS & spray paint after each wheeling session goes along way.

EVO Rockskins (1047-4DBT) - $200 shipped EVO Rocksliders (EVO-1048-4D) - $400 (Will need new mounting plates during welding)

Sold

Fits Jeep JK/JKU Dana 30. Will ship for free. 9000 miles on these. Part # DC-D30-JK $450 https://www.revolutiongear.com/product/d30_4340_chromoly_front_axle_kit_07_18_jeep_wrangler_jk_27_spline_kit_discovery_series Sent from my SM-G892U using WAYALIFE mobile app

OEM steering box, pitman arm, steering pump, resi, hoses, & belt. Had 60k miles on them. No issues. Can ship on buyer's dime. Reasonable offers please. Thanks! Sent from my SM-G892U using WAYALIFE mobile app

Evo Rear Tire Carrier will hold up to a 42” spare tire. Great for street and off road vehicles. No spare tire rattle. All hardware included. Made in USA. Powder coated black. In good condition. Can ship if needed at buyer's expense. $900 Part# EVO 1069 Sent from my SM-G892U using WAYALIFE...

I upgraded to a PSC system so I'm selling my OEM steering box & pitman arm from my 2013 JKU. 65,000 miles on it. No issues. Open for offers. Can be shipped but won't be cheap cause of weight. Picture to follow. Sent from my SM-G892U using WAYALIFE mobile app

I turned on the fan & found 2 fast dripping leaks from 2 hoses going in the engine. Any thoughts? Thanks Sent from my SM-G892U using WAYALIFE mobile app

The air locker wont engage. I turned the rear tires by hand in the video showing an open diff. I also removed the air line from the diff in the video showing good air flow. Any ideas? https://youtu.be/do3-dw3NDgE Thanks for any help. Sent from my SM-G892U using WAYALIFE mobile app

Hey guys/gals Im trying to make the PSC reservior fit in the OEM location by the Airaid CAI. Any pics or tips on how to make it all fit. Tight spaces. Thanks. Sent from my SM-G892U using WAYALIFE mobile app

Had some great times last weekend wheeling at Hidden Falls. But now the jeep is leaking gear oil from both front tubes. My axle is sleeved so I couldnt locate any OUTER tube seals to fit a dana 30. Are new INNER tube seals my only options to keep from water getting into the diff? Thanks...

Hi guys/gals. With 37s, 4" of lift, and Adams front/rear driveshafts would exhaust spacers be needed for flexing out on the trails? Thanks Sent from my SM-G892U using WAYALIFE mobile app

Ill pulled the new driveshaft back off to assess. Gear oil leaking from the backside of the front diff. under the seal. I never saw a crush washer after putting the new yoke on. Any help much appreciated. Sent from my SM-G892U using WAYALIFE mobile app

Thanks for the great write-up Eddie! Does using the steel flat head or pry bar to get the bead under the aluminum wheel damage the wheel much? Sent from my SM-G892U using WAYALIFE mobile app

Hi guys can someone clarify my future tire/wheel combo regarding clearance? I will be going to the Cooper STT Pro 37×13.50×17 tires. My current aftermarket wheels are 17×8.5 with a backspacing of 4.5. Im running the current EVO leveling kit but will most likely need to lift up when I go to...

Not wanting to spend alot money on the dana 30 while saving up for PR44 I did want a lil protection for now so I purchased a thicker diff cover. RH4×4 says that after removing the 5 lower stock bolts the seal may or may not break when installing the new diff cover over the stock diff cover. I...