Search results

I ran 37's with cut fenders/a lot of cutting and no bump stops in the front with no lift; the only place I rubbed was the edge of the cut fender at full flex. The rear was a different story I had to do a lot of cutting and added 2" bumpstops in the rear so the the tire wouldn't go up into the...

37's, no lift I cut off what seemed like 1-1.5" off of the pinch seems front and rear and mine were trimmed from the factory. I ran a 2" bumpstops in the rear and cleared all rubbing issues in the rear. I had to limit my steering travel in the front and did not add bumpstops to the front...

My customized Gmade R1 Rock buggy It's got 4 wheel steer, drag brake, dual batteries that are mounted on axels. I fabbed up the mounts. Lots of other parts! Runs on 2s lipo And my brushless Losi DBXL Has extended aluminum arms, proline trenchers tires, runs on 8s lipo, Size 11...

Hey I was about to update everyone on the shocks and just saw the reply, I went ahead and bought the 4-6" lift fox shocks and installed them today. After flexing, I didn't get anywhere near bottoming out the shock, and when extended the springs are not unseating, makes me happy. I am running the...

Bump with a picture like this:

Finished the kit install today, officially part of the club. Had to drive to work to test it on the RTI ramp, lol. The center of the tire was about 30" I could have gone a tad bit higher but I didn't want to get too close to the stuff in front of me

Just need to install the new front drive shaft.

Time to torque everything down

Rear on the ground

Rear end in the air

Possible pic overload coming today. All loaded up and going to a friends house to install!

My ORO kits just came in today, got it on northridge It has a quick disconnect so you can mount it on a spare tire license plate bracket

All of my parts came in finally, looks like a busy weekend

Brown Santa dropped these off today!! Extended brakelines, evo sway bar links, evo front bumpstops, license plate light bracket and fox shocks.... I think I know what I'll be doing this weekend

Like these?

Got a bigger shaft!

Nothing like jeep parts sitting in you living room. Front and rear springs, drag link flip, rear trackbar relocation, rear bumpstops, and front lower control arms Just waiting for all the small stuff and shocks!

stock flex is really impressive!

Have you considered the crawler concepts body mounted tire carrier? Single action operation as well.

It's not optimal, and I should have been more specific, no rubbing while DD and slight rubbing on front flat fenders which isn't damaging. I did do some pinch seem cutting as well but I'm landing on my bump stops up front and in the rear. i also did make the mistake of not running bump stop...