What was done to your rig this week?

Masjkf84 said:
What did you put there? Mine are doing the same horribly. I’m about to just take them out as nothing I’ve put there worked.
Click to expand...
Haha- just put a piece of a rag and folded up paper but will add a piece of rubber trim to fender when i get around to it but for now, it’s quiet and I’m good with that. I think you’ll be good putting anything that is not metal.
 
Installed the EVO corner guards today. Easy install until it came to the EVO license plate bracket. Unfortunately, it only works without the corner guards so I got to do some basic fabrication. Had to cut off the bracket that reached underneath the tub and then welded the rest directly to the corner guard. Definitely not Jeremy and Chad level welding but it’ll hold. 😎

IMG_8359.jpeg
IMG_8360.jpeg
IMG_8361.jpeg
 
Mike Pierson said:
Installed the EVO corner guards today. Easy install until it came to the EVO license plate bracket. Unfortunately, it only works without the corner guards so I got to do some basic fabrication. Had to cut off the bracket that reached underneath the tub and then welded the rest directly to the corner guard. Definitely not Jeremy and Chad level welding but it’ll hold. 😎

View attachment 425716
View attachment 425717
View attachment 425718
Click to expand...
nice work.

I have Rusty's brand which is similar, have had it out at least 6 times to install and chickened out each time when it comes to drilling the holes into the body.

Not too thrilled about inserting nutserts either (I do have the proper nutsert installer tool).
 
jeeeep said:
nice work.

I have Rusty's brand which is similar, have had it out at least 6 times to install and chickened out each time when it comes to drilling the holes into the body.

Not too thrilled about inserting nutserts either (I do have the proper nutsert installer tool).
Click to expand...
Thanks! I understand the reluctance but if you take the time to set it up it’ll be fine. Use a center punch, small pilot hole, step bit and then finish it up with the final size bit, it goes pretty smooth. 👍🏻
 
Mike Pierson said:
Installed the EVO corner guards today. Easy install until it came to the EVO license plate bracket. Unfortunately, it only works without the corner guards so I got to do some basic fabrication. Had to cut off the bracket that reached underneath the tub and then welded the rest directly to the corner guard. Definitely not Jeremy and Chad level welding but it’ll hold. 😎

View attachment 425716
View attachment 425717
View attachment 425718
Click to expand...
Not worried about the plate dragging coming off a step or something?
 
Andy5160 said:
You are not into spare location? Worked great for me with waterproofed quick connector for the lights .
Click to expand...
Yeah, I’d rather have it up there but we have to have plate lights here. Haven’t seen a bracket I like for the jl spare that keeps the camera and has plate lights and has the brake light.
 
Mike Pierson said:
Installed the EVO corner guards today. Easy install until it came to the EVO license plate bracket. Unfortunately, it only works without the corner guards so I got to do some basic fabrication. Had to cut off the bracket that reached underneath the tub and then welded the rest directly to the corner guard. Definitely not Jeremy and Chad level welding but it’ll hold. 😎

View attachment 425716
View attachment 425717
View attachment 425718
Click to expand...
Nice, looks clean.
 
You must log in or register to reply here.
Top Bottom