Aceisback
Hooked
The slide/mount would still rest on the bed, just secured to the molle to prevent it from sliding or moving around.
Cab is already spoken for.
What was done to your rig this week?
- Thread starter 10frank9
- Start date
Cab is already spoken for.
Bullwinckle
Hooked
Rebel offroad makes one that connects to the bed rail. Thats the only mount I could think of that doesn't require drilling.The slide/mount would still rest on the bed, just secured to the molle to prevent it from sliding or moving around.
Cab is already spoken for.
cozdude
Guy with a Red 2-Door
Honestly I think drilling and securely mounting the fridge slide in the bed is the safest way.Just curious if anyone with a Gladiator has come up with a slide mount for a 12v fridge that doesn’t require drilling and bolting to the bed? Something that mounts to the molle panels is what I’m trying to accomplish.
I’m all ears.
FastEddie760
New member
Cousin Clyde
Hooked
Nice jeep
FastEddie760
New member
Thank you
Launch
Active Member
Turned out great.
Thanks'
Looks great! I kinda miss not having the hoop on my rig now LOL
Thanks, that’s kind of funny. When I was looking at Jaws, I was thinking about not putting it on.
-AINOKEA-
Hooked
Replaced front driver speed sensor. Damn dog was nice enough to move on from chewing up the rear speed sensors but ended up at the front 
so far 3 speed sensors and 2 evo brake lines in the rear, now this front driver speed sensor. Also noticed my trans and bell housing covered in oil 
note the water/oil puddle in the back of the picture.
so far 3 speed sensors and 2 evo brake lines in the rear, now this front driver speed sensor. Also noticed my trans and bell housing covered in oil note the water/oil puddle in the back of the picture. I changed my 2023 Gladiator grill out to a 2024 grill and changed my old bumper to a Evo 1/4 pounder. Looks better. NOW- I'm trying to figure out what bracket I can use to re-mount the Fox shock reservoirs? Is there a specific mount that works or do I need to find someone to fabricate a bracket?
FYI- the reservoirs are "temporarily' mounted until I figure out the solution. Using my other vehicle until I get them mounted safely.
FYI- the reservoirs are "temporarily' mounted until I figure out the solution. Using my other vehicle until I get them mounted safely.
Attachments
I personally have not seen any aftermarket brackets for the factory Mojave Fox reservoirs when using something like a Quarter Pounder bumper. Making something to make them work shouldn't be too difficult though.
ok- thanks for the reply. I watched your video on the KC Highlights Flex Era 4's you put on one of your trucks........great video, so I ordered them today!
I found this generic reservoir mount kit, going to try it out- https://skyjacker.com/shop/shocks/a...shock-mount-kit/#kor_gamma_woocommerce_tabs|2
jeeeep
Hooked
Thanks for replying - I saw them before....the problem is my shock reservoir is 7" long and the brackets on the one you sent the link are 7" apart also, I would want them to be closer so they dont slip off.
IF anyone needs this in the future- i found and ordered this set by Highlife Offroad - https://highliftoffroad.com/products/bolt-on-shock-reservoir-mounting-bracket