Another 22 gladiator build…

Everett

Everett

Member
After driving around with 3/4 spacer lift and 37’s- finally got a full suspension lift (full evo arms, track bars and coilovers). And then the last couple days i got my 1350 driveshaft and geometry brackets installed- not being super mechanically inclined made this job a total pain… here are some pics to show where it sort of started and where I’m at now. Still hoping the rear coilovers break in a little more because it is sitting a bit higher than I’d personally like and the preload and rear shocks are already backed off as far as possible and still sitting pretty high.
 

Attachments

  • IMG_3327.jpeg
    IMG_3327.jpeg
    257.3 KB · Views: 17
  • IMG_3366.jpeg
    IMG_3366.jpeg
    449.5 KB · Views: 17
  • IMG_3371.jpeg
    IMG_3371.jpeg
    238.2 KB · Views: 16
  • IMG_3373.jpeg
    IMG_3373.jpeg
    213.6 KB · Views: 14
  • IMG_3376.jpeg
    IMG_3376.jpeg
    175.4 KB · Views: 17
Everett said:
After driving around with 3/4 spacer lift and 37’s- finally got a full suspension lift (full evo arms, track bars and coilovers). And then the last couple days i got my 1350 driveshaft and geometry brackets installed- not being super mechanically inclined made this job a total pain… here are some pics to show where it sort of started and where I’m at now. Still hoping the rear coilovers break in a little more because it is sitting a bit higher than I’d personally like and the preload and rear shocks are already backed off as far as possible and still sitting pretty high.
Click to expand...
Looks good. You don’t have to be super mechanically inclined, just have fun.
 
Everett said:
Waiting for the delivery guy to show up with my drag link and tie rod… just praying these things come out easy because I’ve been seeing the posts of people going through hell getting the tie rod ends out.
Click to expand...
Hit them with your purse!
 
Finally got it… i struggled a lot because i was too lazy to move the sway bar out of the way to get a good swing of the hammer lol
 

Attachments

  • IMG_3619.jpeg
    IMG_3619.jpeg
    257.4 KB · Views: 7
You must log in or register to reply here.
Top Bottom