RitaRunner
New member
I installed my lift, so I know that the springs aren’t really connected to anything. So if I put a sway bar disconnect in, and flex all the way, what prevents the springs from coming out?
Noob sway bar disconnect question
- Thread starter RitaRunner
- Start date
DirtHeadDavis
Hooked
Assuming your lift is installed correctly, and with corresponding components, your bump stops should be extended properly and your shocks should be for the right amount of lift height.
Upvote
0
RitaRunner
New member
The lift kit installed was the mopar 2” kit, so I assume all the parts are sized correctly.
Upvote
0
bobfriesenhahn
Hooked
As mentioned by others, correct shock extension length should keep your suspension from extending so far that the springs fall out.
Upvote
0